Instruments, Systems, Software, and Services that Enable Broadband Communications
JDSU offers instruments, systems, software, services, and integrated solutions that help communications services providers, equipment manufacturers, and major communications users maintain their competitive advantage at each stage of the network lifecycle.
Installation and commissioning solution for SDH, SONET, PDH, and ATM access networks with line rate testing from 1.544 Mb/s to 2.5 Gb/s.
Advanced data network analyzer for Ethernet, WAN, and ATM networks. The DA-3400 Data Network Analyzer incorporates intuitive, real-time analysis to identify the root cause of network and customer applications problems on 10/100/1000 Ethernet, WAN, ATM, Mobile, and VoIP networks.
A full line of products offering scalable solutions for E1 and data circuits and service testing. Which one meets your application needs?
Defining Intelligent Demarcation
EtherNID™ and MetroNID™ demarcation units define the boundaries of your network, enabling end-to-end service provisioning and assurance with carrier-grade performance.
The industry’s only handheld solution for inspecting and testing fiber networks with one device.The new JDSU HP3-60 display system combines fiber inspection and optical power measurement into a single seamless handheld device. The result is a significant increase in workflow efficiency and a decrease in total inspection and testing time. Also available is the HP3-60-P4 that features an integrated patch cord microscope for dedicated patch cord inspection.
Portable test set addressing the needs of Layer 1 thru Layer 7 testing with IPv6 Capability
Handheld, modular platform for copper and multi-service testing
Base Station Analyzer JD7105A/B for installation and maintenance of modern wireless communication systems
RF Analyzer JD7106A for the acceptance, installation, and troubleshooting of antenna and cable infrastructure in modern wireless communication systems. The RF Analyzer JD7106A combines the functionality of spectrum analysis, interference analysis, cable and antenna analysis, and power measurements.
The majority of the operational problems at base stations are caused in the transmission system (cables and connectors) of the cell site.
The JD720 Series are the best cable and antenna analyzers in the market due to their performance, flexibility and affordability.
JD723A: 100 MHz to 2.700 MHz
JD724B: 25 MHz to 4.000 MHz
JD725A: 25 MHz to 4.000 MHz (two RF-ports)
All-in-one Access/FTTx/Triple-Play Services Test Set
The MTS-4000 is a small, compact and handheld test platform designed for all phases of the network lifecycle, from the installation to the maintenance of Access/FTTx networks and triple-play services. Modular in design, the MTS-4000 offers field service technicians the highest performance and superior levels of scalability and upgradeability.
Highly integrated field optical test solution for single application.The MTS-6000 is a compact and lightweight test platform designed for the installation and maintenance of fiber networks. It offers field service technicians the highest levels of performance and upgradeability on the market. Modular in design, the MTS-6000 offers an extensive portfolio of test functionality, with over 40 different fiber modules supporting a wide range of applications, and is a single source for future fiber and photonic testing needs.
In one rugged, handheld unit, the T-BERD/MTS-6000A Multi-Services Application Module delivers the industry’s most compact 10-Gigabit Ethernet (GigE) multifunction tester for the installation and maintenance of carrier-grade Ethernet and Internet Protocol (IP) services. Technicians can also add testing capability with pluggable physical interface modules (PIMs), small form-factor pluggable modules (SFPs), and 10 Gb/s small form-factor modules (XFPs) to create a variety of field-configurable optical/electrical test combinations.
Advanced scalability for field testing
The MTS-8000 is a field-scalable optical test platform for both installation and maintenance. Based on the rich MTS-5000 heritage, the MTS-8000 is the industry's most innovative and cost-effective test solution for metro networks. A single Transport Module provides an integrated solution for Ethernet, SONET, SDH, PDH, and T-carrier networks. Optical Modules allow thorough testing of short-haul, long-haul, FTTx, CWDM, and DWDM networks.
A complete line of SMART optical power meters for the industry's newest applications including FTTx/PON, 40 Gbps, and Gigabit Ethernet
Optical Network Management System (ONMS)
The optical network performance and monitoring system that keeps the network on target 24 hours a day
Easiest to Use Tool for ADSL2+ Sync and Ping
ADSL1/2/2+ services installation and maintenance tool for field engineers.
The JDSU E1/Datacom Service Testing Companion
The JDSU SmartClass E1 is a handheld field tester for the installation and commissioning of E1 and Datacom service that offers multiple test modes for E1 and Datacom signal analysis. An economical and easy-to-use point solution, the SmartClass E1 has a Smart AutoConfiguration (AutoConfig) feature and large, easy-to-read color display that make the lightweight, rugged, battery-operated tester ideal for both service provider and contractor field technicians. It also meets the needs of mobile operators in the construction of E1 backhaul infrastructure.
The SmartClass Ethernet product is an easy to use, cost effective Ethernet testing solution for basic physical layer cable testing, layer 2 and layer 3 traffic generation, and full RFC 2544 testing. The rugged, battery operated, application specific test tool enables field technicians to turn-up Ethernet and IP services by running an RFC 2544 test or following a set of methods and procedures. The product has been designed for front-line technicians who do not have experience dealing with emerging Metro Ethernet technologies and need a simple to use solution for Ethernet and IP testing. The SmartClass product comes in two major configurations, one a loopback only device and the other featuring full traffic generation.
The JDSU SmartClass Triple Play Services (TPS) Tester is the ideal tool for technicians who install, troubleshoot, and maintain Triple-Play services. The tester lets technicians test copper loop quality, verify asynchronous digital subscriber line (ADSL) signal and performance, and validate customer Internet connections with the integrated Web browser and File Transfer Throughput test. Software options are available for voice over Internet Protocol (VoIP) and IP Video that allow for detailed analysis of Quality of Service (QoS) and Quality of Experience (QoE). The SmartClass TPS gives field technicians easy access for instrument management, field upgrades of software options, and uploading pre-set configurations or downloading results using a universal serial bus (USB) flash drive. The SmartClass TPS is an intuitive, full range Triple-Play Services tester that is scalable for mass market deployments and future requirements.
|
