-
Network and Security Solutions
( 0 Articles )
Network Solutions:
This solution group includes solutions that increase the profits and constitute new profit centers.We prefer solutions for Telco,ISP and Energy Market Because of the developments in the market;information and well-experience we have.
The main chapters that we are capable of:
- IP Applications
- Voice Over IP (VOIP)
- Wireless Solutions
- MPLS
- MPLS VPN
- Layer 2 VPN
- Layer 3 VPN
- Security and IPSEC Tunneling Solutions
- SSL VPN
Security Solutions:
If we ask any organization about their critical network concerns these days, security will invariably reside at the very top of their list. Whether that organization is an enterprise, service provider, government, or research & education institution, our company provides profidable network solutions for security...
PL4C Security Solutions; meets all securiy requirements of interwork could not be fulfilled with only one technology therefore security that is provided by network architecture is only a part of the total solution.Total security solution is achieved by providing security levels according to security policy of corporation,as mentioned below:
- Network Security
- System Security
- User Security
- Application Security
- Application Level Security
Check point is our strategic partner for these product group.
-
Test and Measurement Devices
( 0 Articles )
Instruments, Systems, Software, and Services that Enable Broadband Communications
JDSU offers instruments, systems, software, services, and integrated solutions that help communications services providers, equipment manufacturers, and major communications users maintain their competitive advantage at each stage of the network lifecycle.
Installation and commissioning solution for SDH, SONET, PDH, and ATM access networks with line rate testing from 1.544 Mb/s to 2.5 Gb/s.
Advanced data network analyzer for Ethernet, WAN, and ATM networks. The DA-3400 Data Network Analyzer incorporates intuitive, real-time analysis to identify the root cause of network and customer applications problems on 10/100/1000 Ethernet, WAN, ATM, Mobile, and VoIP networks.
A full line of products offering scalable solutions for E1 and data circuits and service testing. Which one meets your application needs?
Defining Intelligent Demarcation
EtherNID™ and MetroNID™ demarcation units define the boundaries of your network, enabling end-to-end service provisioning and assurance with carrier-grade performance.
The industry’s only handheld solution for inspecting and testing fiber networks with one device.The new JDSU HP3-60 display system combines fiber inspection and optical power measurement into a single seamless handheld device. The result is a significant increase in workflow efficiency and a decrease in total inspection and testing time. Also available is the HP3-60-P4 that features an integrated patch cord microscope for dedicated patch cord inspection.
Portable test set addressing the needs of Layer 1 thru Layer 7 testing with IPv6 Capability
Handheld, modular platform for copper and multi-service testing
Base Station Analyzer JD7105A/B for installation and maintenance of modern wireless communication systems
RF Analyzer JD7106A for the acceptance, installation, and troubleshooting of antenna and cable infrastructure in modern wireless communication systems. The RF Analyzer JD7106A combines the functionality of spectrum analysis, interference analysis, cable and antenna analysis, and power measurements.
The majority of the operational problems at base stations are caused in the transmission system (cables and connectors) of the cell site.
The JD720 Series are the best cable and antenna analyzers in the market due to their performance, flexibility and affordability.
JD723A: 100 MHz to 2.700 MHz
JD724B: 25 MHz to 4.000 MHz
JD725A: 25 MHz to 4.000 MHz (two RF-ports)
All-in-one Access/FTTx/Triple-Play Services Test Set
The MTS-4000 is a small, compact and handheld test platform designed for all phases of the network lifecycle, from the installation to the maintenance of Access/FTTx networks and triple-play services. Modular in design, the MTS-4000 offers field service technicians the highest performance and superior levels of scalability and upgradeability.
Highly integrated field optical test solution for single application.The MTS-6000 is a compact and lightweight test platform designed for the installation and maintenance of fiber networks. It offers field service technicians the highest levels of performance and upgradeability on the market. Modular in design, the MTS-6000 offers an extensive portfolio of test functionality, with over 40 different fiber modules supporting a wide range of applications, and is a single source for future fiber and photonic testing needs.
In one rugged, handheld unit, the T-BERD/MTS-6000A Multi-Services Application Module delivers the industry’s most compact 10-Gigabit Ethernet (GigE) multifunction tester for the installation and maintenance of carrier-grade Ethernet and Internet Protocol (IP) services. Technicians can also add testing capability with pluggable physical interface modules (PIMs), small form-factor pluggable modules (SFPs), and 10 Gb/s small form-factor modules (XFPs) to create a variety of field-configurable optical/electrical test combinations.
Advanced scalability for field testing
The MTS-8000 is a field-scalable optical test platform for both installation and maintenance. Based on the rich MTS-5000 heritage, the MTS-8000 is the industry's most innovative and cost-effective test solution for metro networks. A single Transport Module provides an integrated solution for Ethernet, SONET, SDH, PDH, and T-carrier networks. Optical Modules allow thorough testing of short-haul, long-haul, FTTx, CWDM, and DWDM networks.
A complete line of SMART optical power meters for the industry's newest applications including FTTx/PON, 40 Gbps, and Gigabit Ethernet
Optical Network Management System (ONMS)
The optical network performance and monitoring system that keeps the network on target 24 hours a day
Easiest to Use Tool for ADSL2+ Sync and Ping
ADSL1/2/2+ services installation and maintenance tool for field engineers.
- The JDSU E1/Datacom Service Testing Companion
The JDSU SmartClass E1 is a handheld field tester for the installation and commissioning of E1 and Datacom service that offers multiple test modes for E1 and Datacom signal analysis. An economical and easy-to-use point solution, the SmartClass E1 has a Smart AutoConfiguration (AutoConfig) feature and large, easy-to-read color display that make the lightweight, rugged, battery-operated tester ideal for both service provider and contractor field technicians. It also meets the needs of mobile operators in the construction of E1 backhaul infrastructure.
-
- The SmartClass Ethernet product is an easy to use, cost effective Ethernet testing solution for basic physical layer cable testing, layer 2 and layer 3 traffic generation, and full RFC 2544 testing. The rugged, battery operated, application specific test tool enables field technicians to turn-up Ethernet and IP services by running an RFC 2544 test or following a set of methods and procedures. The product has been designed for front-line technicians who do not have experience dealing with emerging Metro Ethernet technologies and need a simple to use solution for Ethernet and IP testing. The SmartClass product comes in two major configurations, one a loopback only device and the other featuring full traffic generation.
-
The JDSU SmartClass Triple Play Services (TPS) Tester is the ideal tool for technicians who install, troubleshoot, and maintain Triple-Play services. The tester lets technicians test copper loop quality, verify asynchronous digital subscriber line (ADSL) signal and performance, and validate customer Internet connections with the integrated Web browser and File Transfer Throughput test. Software options are available for voice over Internet Protocol (VoIP) and IP Video that allow for detailed analysis of Quality of Service (QoS) and Quality of Experience (QoE). The SmartClass TPS gives field technicians easy access for instrument management, field upgrades of software options, and uploading pre-set configurations or downloading results using a universal serial bus (USB) flash drive. The SmartClass TPS is an intuitive, full range Triple-Play Services tester that is scalable for mass market deployments and future requirements.
-
Fiber Optics and PON
( 0 Articles )
Alloptic is the industry's first company to successfully bridge traditional telephone service, Ethernet service, and RF video service onto a single, seamless, passive optical distribution platform. By bringing together the technical worlds of passive optical networking (PON) and the emerging RF over Glass (RFoG), Alloptic provides a unique, hybrid PON, solution providing the operator the flexibility to the services they choose, in the format they prefer. This hybrid PON solution allows Telco operators the ability to leverage today's RF video technology while being transparent to the PON technology. Similarly, the hybrid PON allows a CATV provider to offer cable modem service and business Ethernet services.
Central Office Equipment
Alloptic offers a wide array of central office equipment to support your GEPON deployment.
Alloptic's central office chassis provides carriers with native service integration, multi-layer switching and excellent port density in a compact footprint.
|
EDGE 10 |
| The edge10 will bring the power of a 10G PON to your subscribers. Designed to provide seamless, reliable connectivity between your core network and your optical access network, the edge10 will be Alloptic's newest central office chassis. The edge10 aggregates voice, data, and video services for delivery to your customers with the flexibility to support TDM or IP voice, RF or IP video, and ultra-high speed data. With a full compliment of testing and management capabilities, the edge10 will provide unparalleled bandwidth, functionality, and reliability. |
|
EDGE 200 |
| Designed to provide cost effective, reliable connectivity between your core network and your optical access network, the edge200 is Alloptic's stackable central office chassis. The Alloptic edge200 delivers Alloptic's proven reliability for delivering Voice, Data, and Video service to as few as two PONs while maintaining all of Alloptic's current network management capabilities. The edge200 provides a full gigabit of bandwidth on each of 2 PONs from a compact 2U, 19" rack mounted chassis. The edge200's temperature hardened electronics and comprehensive remote management make it ideal for remote applications without the need for expensive buildings or environmentally controlled enclosures. With a full compliment of testing and management capabilities, the edge200 provides unparalleled flexibility and performance |
FTTP Equipment
Alloptic offers the widest array of ONTs for your fiber deployment. Whether you are looking for an indoor unit for a single location, a fully hardened MDU unit, or the ability to deliver full gigabit service to a Business, Alloptic has an ONT to fit your application.
The Alloptic Solution enables service providers to untangle the access network by providing true broadband technology to the core network. With the ability to cost effectively provide differentiated service and unlock new revenue potential from voice, data, and video services.
|
|
 |
HOME 4000 |
| Customer premises ONT to deliver voice, video and data services to residential and small business customers. |
|
|
XGEN 1000 |
|
Compact Customer premises ONT to deliver T1/E1 voice, and advanced data services to businesses. |
|
XGEN 6000 |
| Customer premises ONT to deliver voice, video and data services to multiple dwelling units (MDU), including apartment complexes, high rise buildings, and strip malls. |
|
XGEN 8000 |
| High performance ONT for business and backhaul applications. The Xgen 8000 supports upto a full 1 Gigabit service rates. |
|
XGEN 9000 |
| Environmentally hardened, this compact ONT provides flexibility to serve T1/E1, Cat 5, or Optical services to business customers. |
RFoG Equipment
Alloptic offers a complete line of headend/hub equipment including Laser Transmitters, EDFAs, Return Path Receivers, and passive splitters. With our MicroNode family of products, Alloptic provides you all the components you need to deliver an RFoG solution to your customers. Delivering OpEx savings and seamless migration over a fiber optic infrastructure.
|
MicroNode RFoG ONU |
| Designed to provide today's forward and return path services over a fiber optic infrastructure. Agnostic to both your headend and customer premise equipment, the MicroNode R-ONU saves time and money while providing you a signficant competitive advantage. |
|
EdgeVideo Optical Amplifiers |
| Optimized for Alloptic's RFoG and PON solutions, the EdgeVideo Optical EDFA and DCF Amplifiers provide the optical boost required to deliver RF services to your customers. |
|
EdgeVideo Laser Transmitter |
| Designed as an industry standard laser transmitter, Alloptic edge video laser transmitter provides the optical tranmission capabilities required to deliver RF video services. |
|
EdgeVideo Return Path Transmitter |
| Designed to be an integral part of two-way RF access networks, the Alloptic Return Path Transmitter provides return path transmission capabilities in long distance or fiber starved environments, providing long reach transmission and/or multiple receiver aggregation functionality. |
|
EdgeVideo Return Path Receiver |
| Designed to enable RF return path services, Alloptic's edge video return path receiver is tuned for today's burst modes transmitters. |
|
EdgeVideo Passive Support for PON |
| Designed to provide you maximum flexibility in your network, Alloptics edge passive support for PON (EPSP) family of products allows you to ability quickly and seamlessly migrate from an optical forward/return path network to a GEPON network or a blended network. |
Management Solution
Alloptic offers an on-board management solutions (GigaVu) for managing a single device as well as an integrated network management solution (GEMS) for managing an entire network. With GEMS we are able to integrate your Alloptic access network into your existing OSS/BSS solutions. If you are using DOCSIS to provision your network today, the third Alloptic management option, the DPC DOCSIS PON Controller, allows you continue to use your current DOCSIS provisioning processes and back office software while rolling out an EPON architecture using Alloptic equipment.
-
Ethernet Tap
( 0 Articles )
VSS Monitoring’s traffic capture tools are hardware-based devices designed to passively copy and forward network traffic in real time for a monitoring or security deployment. VSS distinguishes itself as the only traffic capture vendor offering complete traffic capture solutions for total, user-controlled visibility, greater monitoring efficiency and ROI, and reduced response times. Our broad product portfolio offers Traditional Taps and SPAN tools as well as intelligent and highly scalable Distributed Tapsand Distributed Traffic Capture Systems™.
|
Solutions
Distributed Taps are intelligent traffic capture tools designed to passively tap or receive unidirectional inputs from multiple networks and forward the traffic as selected by the user to multiple independent monitor ports. Distributed Taps feature
